Connecting cable unshielded for SIMATIC S7-1500 64 I/O between I/O modul X10 or X11 and connection module 32 I/O 0.14 mm2, L = 3.0m, 1 pcs. 40 of 50 pole IDC connector The 40-pin round cable (unshielded) with a length of 3.0m is assembled on the side of the I/O card with 40-pin IDC plugs and on the side of the connection module with a 50-pin IDC plug. This pre-assembled cable enables a trouble-free and safe signal flow. Thus, even complex installations remain manageable and can be checked in the shortest possible time, which makes maintenance and expansion affordable.This pre-assembled connecting cable is part of the fully modular SIMATIC TOP connect connection for thefastest and safest system cabling. In addition to low wiring costs, error sources in cabling can be significantly reduced. Sensors and actuators from the peripherals are connected to the connection modules of SIMATIC TOP connect and connected to the SIMATIC S7-1500 via connecting cable and front plug-in module.
Samsvarssertifikat
RoHS
Pakkebredde
300 mm
Pakkedybde
300 mm
Pakkehøyde
45 mm
Pakkevekt
527 g
Antall stenger inkludert
40
Minimum ordreantall
1 stykker
Batteri inkludert
Nei
Type of electrical connection, field-sided
Connection plug board
Egnet for digitale signaler
Ja
Egnet for analoge signaler
Nei
Egnet for PLC-inngangskort
Nei
Type elektrisk tilkobling (boksside)
Connection plug board
Egnet for PLC-utgangskort
Ja
Maksimalt bestillingsantall
1 stykker
Produktet har følgende varenummer i vårt system:
EAN:
4025515155706
SKU:
6ES79235BD000GB0
Hvorfor ser jeg at det samme produktet er tilgjengelig på forskjellige varenumre?
Produsenter lanserer ofte det samme produktet med forskjellige varenumre, vanligvis bare forskjellige versjoner av emballasjen. For eksempel kan emballasjen være rettet mot forskjellige land.
Vi gjør vårt beste for å forene produktene, men det kan skje at det samme produktet vises på forskjellige varenumre i systemet vårt.